Richmond 1

A welded steel framed gate with finals welded to the top rail and in filled with tongue and grove boards. The frame is galvanised and powder coated black. Can be manually operated or automated. More Richmond gates

Palisade 6

The Palisade P6 is a driveway gate suitable for automation, the rails are through morticed into the stiles and the pickets morticed into the underside of the top rails. The pickets are screwed and pelleted to the middle and bottom rails. More Palisade gates

Palisade 5

A convex gate of a traditional design, which can be manufactured as a single garden gate or a pair of entrance gates. The pickets are screwed and pelleted to the front face of the gate. and protrude above the top rail. The rails are morticed glued and wedged through the stiles. More Palisade gates

Palisade 4

A convex gate of a traditional design, which can be manufactured as a single garden gate or a pair of entrance gates. The pickets are screwed and pelleted to the front face of the gate. and protrude above the top rail. The rails are morticed glued and wedged through the stiles. More Palisade gates

Windsor 3

Pairs The hardwood gates have half lapped crosses with wooden turned spindles in the lower half. Manufactured from ex 75mm thick timber.

Windsor WS2

The Windsor WS2 can be manufactured as a garden gate, a pair of gates or a large swing gate. The gate has three horizontal rails through morticed into the stiles. The lower part of the gate has stop chamfered spindles and the crosses are half lapped.    

Windsor 2

The Windsor WS2 can be manufactured as a garden gate, a pair of gates or a large swing gate. The gate has three horizontal rails through morticed into the stiles. The lower part of the gate has stop chamfered spindles and the crosses are half lapped.

Windsor WS1

The Windsor WS1 can be manufactured as an garden gate, a pair of gates or a large swing gate up to 3.6m wide. The gate has four horizontal rails through morticed into the stiles. The crosses are half lapped and the steel bars either galvanised or powder coated.

Windsor 1

The Windsor WS1 can be manufactured as an garden gate, a pair of gates or a large swing gate up to 3.6m wide. The gate has four horizontal rails trough morticed into the stiles. The crosses are half lapped and the steel bars either galvanised or powder coated.

Balmoral BA4

The Balmoral BA4 has a lower section manufactured with close boarded tongue and groove timber to provide added security for pets and children. The upper section is still to the attractively curved style with infill bars within galvanised and powder coated steel bars steel powder coated to any RAL number of your choice.